Chute Feeder

The trough feeder is used to transport materials from the storage bin to the receiving device (not suitable for conveying materials in powder state). It can be installed on the ground or hoisted onto the discharge port of the ore bin. The groove bottom plate undergoes reciprocating motion, with a stroke of 20-60 times/min and a stroke of 20-200mm. The stroke can be adjusted appropriately by the eccentric wheel of the driving device, with an eccentricity of half the stroke, suitable for mineral processing, chemical industry, coal, and other departments.

Category: Metallurgical and mining equipment

Product Inquiry

+86-13100518958

sales08@gxhongfa.com

Product Overview

Main technical parameters of Chute Feeder

Type	Width of Discharge Gate (mm)	Height of Discharge Gate (mm)	Max. Inlet Size (mm)	Return Frequency from Chute End (r/min)	Capacity (m³/h)	Motor		Overall Size L × W × H (mm)	Weight (t)
Type	Width of Discharge Gate (mm)	Height of Discharge Gate (mm)	Max. Inlet Size (mm)	Return Frequency from Chute End (r/min)	Capacity (m³/h)	Type	Power (kw)	Overall Size L × W × H (mm)	Weight (t)
400×300	400	300	100	18.8	2.5~3	Y90L-6	1.1	2350×725×625	0.54
400×400	400	400	200	49.15	0~19	Y90S-6	1.1	2820×800×600	0.85
600×500	600	500	200	25	10~50	YCDT160-4A	5.5	2750×910×855	1.25
600×1450	600	1450	350	23.7	20~80	Y132M-4	7.5	3079×975×1125	1.55
750×800	750	800	250	24	36~90	Y160L-8	7.5	3328×1060×1213	1.73
980×1240	980	1240	350	24	40~100	Y160L-8	7.5	2861×1280×1173	1.85
1120×1240	1120	1240	350	24	50~100	Y160L-8	7.5	3405×1390×1710	1.98
1400×1200	1400	1200	350	40.5	50~110	Y160L-6	15	4090×1878×2099	4.42

Keywords:

Chute Feeder Metallurgical and mining equipment

Chute Feeder

Power generation equipmentMetallurgical and mining equipmentEnvironmental protection equipment

Get a product quote WhatsApp

Consultation hotline：

+86-13100518958

Related products

Gyratory Crushers

The rotary cusher is widely used in industries such as metallurgy,building materials, chemical industry,and hydropower.lt is one of the main equipment for coarse crushing of ores or rocks,with characteristics such as high crushing ratio,high production capacity,and uniform product particle size.

Jaw Crusher

Jam crusher is an early type of crushing equipment, mainly used for medium crushing of various ores and bulk materials. Due to its simple structure, easy manufacture, reliable operation, and easy maintenance, it is widely used in mineral processing, building materials, silicate, metallurgy, chemical engineering, and other industrial sectors. The compressive strength of the crushed material shall not exceed 140-250MPa.

Cone Crusher

Cone crushers are widely used in mines, cement plants, and the sand and gravel industry, suitable for medium to fine crushing of various mining rocks with compressive strength below 350Mpa, such as iron ore, copper ore, limestone, quartz, granite, basalt, sandstone, pebbles, etc. This type of crusher mainly consists of a frame, transmission device, hollow eccentric shaft, bowl shaped bearing, crushing cone, adjustment device, adjustment sleeve, spring, and hydraulic station for adjusting ore discharge.

High-efficiency Cone Crusher

Efficient cone crusher is a cone crusher that introduces advanced technology from the United States and represents the advanced level of domestic technology. It is widely used in metallurgy, construction, chemical, and building materials industries. Suitable for crushing hard, medium hard ores and rocks. For example: iron ore, limestone, quartz, granite, etc.