Flotation Machine

Flotation machines are suitable for separating non-ferrous metals, ferrous metals, precious metals, non-metallic minerals, and chemical raw materials. They can be used for rough selection, sweeping, selection, or reverse flotation operations. In the flotation machine, the pulp mixed with reagents can selectively attach the target mineral particles to the bubbles through stirring and aeration, float to the pulp surface to be scraped out to form foam products, and the rest of the materials are retained in the pulp, so as to achieve the purpose of separating minerals.

Category: Metallurgical and mining equipment

Product Inquiry

+86-13100518958

sales08@gxhongfa.com

Product Overview

Working principle

The motor drives the main shaft through the triangle belt to make its lower impeller rotate to produce centrifugal effect and form negative pressure. On the one hand, it absorbs sufficient air to mix with the slurry, on the other hand, it stirs the slurry and drugs to mix, and at the same time, it refines the foam so that the minerals adhere to the foam and float to the slurry surface to reshape the mineralized foam. By adjusting the height of the ram and controlling the liquid level, the useful foam can be scraped out by the scraper.

Technical Parameters of Flotation Machine

Type	Groove Volume (m³)	Impeller Diameter (mm)	Impeller Rotating Speed (r/min)	Capacity (m³/h)	Foam Scrape Speed (r/min)	Impeller Motor		Foam Scrape Motor		Mesh Size of Per Grooves L.×W.×H. (mm)	Weight of Per Grooves (t)
Type	Groove Volume (m³)	Impeller Diameter (mm)	Impeller Rotating Speed (r/min)	Capacity (m³/h)	Foam Scrape Speed (r/min)	Type	Power (kw)	Type	Power (kw)	Mesh Size of Per Grooves L.×W.×H. (mm)	Weight of Per Grooves (t)
SF-0.37	0.37	300	445	0.2~0.4	16	Y100L-4	2.2	Y80-4	0.55	700×700×800	0.468
SF-0.7	0.7	350	400	0.3~0.9	16	Y132M1-6	4	Y90L-6	1.1	820×900×920	0.604
SF-1.2	1.2	450	312	0.6~1.6	16	Y132M2-6	5.5	Y90L-6	1.1	1100×1100×1100	1.373
SF-2.8	2.8	550	268	1.5~3.5	16	Y180L-8	11	Y100L-6	1.5	1700×1600×1150	2.338
SF-4.0	4.0	650	238	2.0~4.0	16	Y200L-8	15	Y100L-6	1.5	1850×2050×1200	2.660
SF-8.0	8.0	760	191	4.0~8.0	16	Y250M-8	30	Y100L-6	1.5	2200×2900×1400	4.130

Keywords:

Flotation Machine Metallurgical and mining equipment

Flotation Machine

Power generation equipmentMetallurgical and mining equipmentEnvironmental protection equipment

Get a product quote WhatsApp

Consultation hotline：

+86-13100518958

Related products

Gyratory Crushers

The rotary cusher is widely used in industries such as metallurgy,building materials, chemical industry,and hydropower.lt is one of the main equipment for coarse crushing of ores or rocks,with characteristics such as high crushing ratio,high production capacity,and uniform product particle size.

Jaw Crusher

Jam crusher is an early type of crushing equipment, mainly used for medium crushing of various ores and bulk materials. Due to its simple structure, easy manufacture, reliable operation, and easy maintenance, it is widely used in mineral processing, building materials, silicate, metallurgy, chemical engineering, and other industrial sectors. The compressive strength of the crushed material shall not exceed 140-250MPa.

Cone Crusher

Cone crushers are widely used in mines, cement plants, and the sand and gravel industry, suitable for medium to fine crushing of various mining rocks with compressive strength below 350Mpa, such as iron ore, copper ore, limestone, quartz, granite, basalt, sandstone, pebbles, etc. This type of crusher mainly consists of a frame, transmission device, hollow eccentric shaft, bowl shaped bearing, crushing cone, adjustment device, adjustment sleeve, spring, and hydraulic station for adjusting ore discharge.

High-efficiency Cone Crusher

Efficient cone crusher is a cone crusher that introduces advanced technology from the United States and represents the advanced level of domestic technology. It is widely used in metallurgy, construction, chemical, and building materials industries. Suitable for crushing hard, medium hard ores and rocks. For example: iron ore, limestone, quartz, granite, etc.