Inquiry
OA
Sawtooth Wave jigger
Category: Metallurgical and mining equipment
Product Overview
The sawtooth wave jig is an efficient and energy-saving gravity separation equipment developed and improved on the basis of traditional sine wave jigs. As a raw ore enrichment, rough selection, and selection operation, the sawtooth wave jig is widely used to improve the grade of low-grade manganese ore and limonite, recover non-ferrous metals from industrial slag, and useful minerals in river sand, such as gold, tungsten, tin, manganese, iron, lead, zinc, diamond, etc., with significant benefits.
Technical Parameters of Sawtooth Wave jigger
| Type | Jigging Room | Jigging Membrane | Inlet Size (mm) | Water replenishing (m³/t) | Capacity (t/h) | Power (kW) | Size L×W×H (mm) | ||
| Type | Area (m²) | Stroke (mm) | Frequency (times/min) | ||||||
| JT0.57-1 | Trapezoid | 0.57 | (M12 Cam)8.5~12 | 60 ~ 160 | <6 | 1 ~ 2 | 1.5 ~ 3 | 1.5 | 1550×780×1530 |
| JT1-1 | Trapezoid | 1.04 | (M17 Cam)10~17 | <10 | 2 ~ 3 | 2.5 ~ 5 | 2.2 | 2270×1110×1890 | |
| JT2-2 | Rectangle | 2.28 | (M21 Cam)12~21 | <10 | 2 ~ 4 | 5 ~ 10 | 3 | 3225×1550×2050 | |
| JT3-1 | Trapezoid | 3 | 12 ~ 30 | 50 ~ 125 80 ~ 110 |
<10 | 3 ~ 6 | 7.5 ~ 15 | 5.5 | 2745×2000×3030 |
| JT4-2 | Rectangle | 4 | 25 ~ 57 | <25 | 4 ~ 8 | 8 ~ 20 | 7.5 | 4240×1990×2750 | |
| JT4-2A | Rectangle | 4 | 25 ~ 57 | <25 | 4 ~ 8 | 8 ~ 20 | 4×2 | 4240×1990×2750 | |
| JT5-2 | Trapezoid | 4.86 | 12 ~ 30 | <10 | 3 ~ 6 | 12 ~ 25 | 7.5 | 3600×2000×2600 | |
| JT5-2A | Rectangle | 4 | 12 ~ 30 | <15 | 4 ~ 8 | 8 ~ 20 | 5.5×2 | 4240×1990×2750 | |
| JT6-3 | Trapezoid | 6 | 12 ~ 30 | <20 | 7.5 ~ 12.5 | 12 ~ 25 | 5.5×7.5 | 5650×2080×3030 | |
Keywords:
Sawtooth Wave jigger Metallurgical and mining equipment
Sawtooth Wave jigger
Power generation equipmentMetallurgical and mining equipmentEnvironmental protection equipment
Get a product quote WhatsAppConsultation hotline：
Related products
The rotary cusher is widely used in industries such as metallurgy,building materials, chemical industry,and hydropower.lt is one of the main equipment for coarse crushing of ores or rocks,with characteristics such as high crushing ratio,high production capacity,and uniform product particle size.
Jam crusher is an early type of crushing equipment, mainly used for medium crushing of various ores and bulk materials. Due to its simple structure, easy manufacture, reliable operation, and easy maintenance, it is widely used in mineral processing, building materials, silicate, metallurgy, chemical engineering, and other industrial sectors. The compressive strength of the crushed material shall not exceed 140-250MPa.
Cone crushers are widely used in mines, cement plants, and the sand and gravel industry, suitable for medium to fine crushing of various mining rocks with compressive strength below 350Mpa, such as iron ore, copper ore, limestone, quartz, granite, basalt, sandstone, pebbles, etc. This type of crusher mainly consists of a frame, transmission device, hollow eccentric shaft, bowl shaped bearing, crushing cone, adjustment device, adjustment sleeve, spring, and hydraulic station for adjusting ore discharge.
Efficient cone crusher is a cone crusher that introduces advanced technology from the United States and represents the advanced level of domestic technology. It is widely used in metallurgy, construction, chemical, and building materials industries. Suitable for crushing hard, medium hard ores and rocks. For example: iron ore, limestone, quartz, granite, etc.
PRODUCT CONSULTING
Note: Please leave your email address and our professionals will contact you as soon as possible!
Address：No. 4 Hantang Road, Jiangnan District, Nanning City, Guangxi Zhuang Autonomous Region, China
Douyin
official account
Sorry, there is currently no content in the current column
You can check other sections
License
